Ourlife 2026 Dual Band WiFi Range Extender, 2.4GHz & 5GHz Signal Booster Repeater with 1200Mbps Speed, Wall-Through WiFi Amplifier, Covers up to 10000 Sq.ft (Black)

Welcome to Ourlife by BWWL! We’re delighted to have you here. If you need any help or have questions, feel free to contact us anytime — we’re always here for you. The Ourlife 2026 Dual Band WiFi Extender Signal Booster delivers powerful 2.4GHz and 5GHz dual-band speeds to expand your home or outdoor WiFi coverage up to 10,000 sq.ft. Designed with the latest WiFi 7 (802.11be) technology, this wireless repeater ensures stable and high-speed connections for your routers, security cameras, and smart devices. Whether you need a WiFi booster extender for camera, a dual band amplifier wireless internet repeater, or a WiFi 6 compatible range extender, Ourlife offers the best 2026 solution for eliminating dead zones and boosting signal strength indoors or outdoors. Step-by-Step Setup Guide Connect to Initial WiFiOpen your phone/PC WiFi settings → Select the hotspot named “Repeater_XXXX” (no password required for this initial connection). Access the Setup PageYour device will auto-jump to the extender’s setup interface. If it doesn’t, open a browser and enter “192.168.1.1” (default IP). Then click “LOGIN”. Choose Your Mode Select Repeater Mode (Most users choose this: extends your existing WiFi signal, no cable needed). Select AP Mode only if you connect the extender to your router via an Ethernet cable (converts wired to wireless). Pair with Your Home RouterWait for the extender to scan nearby WiFi → Select your home router’s SSID → Enter your router’s password. Customize Extender WiFi (Optional)Check the box if you want a unique WiFi name/password for the extender → Click “NEXT”. Complete SetupClick “Finish” → Wait 30 seconds. Confirm the extender’s WiFi indicator turns green (solid) (this means setup is successful). Note: To reset the extender (if setup fails), press the side “RST” button for 8+ seconds to restore factory settings, then re-do the steps above. Mode Difference Tips Repeater Mode (Recommended): Extends your existing WiFi signal. Place the extender 1-3ft from your router during setup, then move it to a middle spot (between router and WiFi dead zone). AP Mode: Requires an Ethernet cable (plug into the extender’s LAN port). Use this if you need to turn a wired network port into a wireless hotspot. Indicator Light Cheat Sheet Wondering if your extender’s working? Just check these lights (peek at Product Image 1) — no more guessing it’s “broken”! Power Light Green and steady: Your extender’s turned on and ready to go. WiFi Light Green and steady: Good news! Your extender’s connected to your router perfectly. Flashing red: Oops — it didn’t pair with your router. Double-check your router password and try again. 2.4G/5G Light Blue and steady: The 2.4GHz or 5GHz WiFi band (whichever you’re using) is up and running. Troubleshooting Tips Issue 1: Can’t find “Repeater_XXXX” WiFi?Fix: Ensure the extender is plugged into a working power outlet. Wait 1 minute for it to boot up. Issue 2: Can’t connect to my router?Fix: Confirm your router has 2.4GHz/5GHz band enabled (check your router’s settings). Move the extender closer to the router (1-3ft) and re-try. Issue 3: Setup fails & can’t re-connect?Fix: Press the side “RST” button for 8+ seconds to reset → Re-do the setup steps. Issue 4: Weak signal after setup?Fix: Move the extender to a “middle spot” (between your router and the WiFi dead zone) — avoid blocking by walls/metal appliances.