This product Is heavy and light, easy to fall in the vertical state Product key data Engineer type:44mm, single cylinder, air cooling, 2 stroke Fuel: Mixing oil(Gasoline 25, Two-stroke Engine Oil 1) Fuel tank capacity: 1.3l Displacement: 52cc Max power and speed: 1.9k W/6500r/Min Max torque and speed: 3.5n. M/5000r/Min Consumption rate: ≤0.6l/H Impact frequency: 1500bpm Impact energy: 20-55j Starter system: Hand pull start Net weight: 20.5 Kg(45.19lb) Dimensions: 690*370*270mm(27.17*14.57*10.63inch) Cylinder diameter * Stroke: 44×34 Mm(1.73×1.34 Inches) Spark plug model: Bm6a
52 cc Demolition Jack Hammer Concrete Breaker Drill w/ 2 Chisel Gas-Powered (Please Note: This Product Is Heavy on Top and Light on Bottom. It Is Easy to Fall When Standing Upright. Please Pay Attention to the Posture to Avoid Falling and Damaging the Machine) This Product Is Heavy and Light, Easy to Fall in the Vertical State, Please Pay Attention to Posture to Avoid Falling and Damage the Machine, Due to Falling Products Damaged, the Company Does Not Assume After-sale Responsibility. Product Key Data Engineer Type:44mm, Single Eylinder, Air Coling, 2 Stroke Fuel:mixing Oil(Gasoline 25, Two-stroke Engine Oil 1) Fuel Tank Capacity:1.3l Displacement: 52cc Max Power and Speed: 1.9k W/6500r/Min Max Torque and Speed:3.5n.m/5000r/Min Consmption Rate:≤0.6l/H Impact Fregnency:1500bpm Impact Enengy: 20-55j Starter System:hand Pull Start Net Weight :20.5 Kg(45.19lb) Dimensions: 690*370*270mm(27.17*14.57*10.63inch) Cylinder Diameter * Stroke :44×34 Mm(1.73×1.34 Inches) Spark Plug Model: Bm6a Main Use and Feature Use I It Can Use on Building Construction ,Road Building Project in the Broken . 2 Break Cormerstone for the Railway Road and Tamp Sleepers Tamping Work . 3 Power Embedded in the Telecommunications Cables Broken Ditching Work 4 Cold Water and Ice Breaking Region ,the Frozen Road Digging Shovel to Clear Cutting of Destroying Other Destroying Other Strong Areas. Packing List: Machine+Drill*2+ Proportioning Bucket+Funnel+Filter+Small Accessories*7 Instruction of Safe Operation I. the Operator Need Wear Sip-esistant Safety Shoes. Appropriate Clothing. Wear Goggles and Helmet, Wear Earplugs for a Long Time Operation. 2. Balance Body When You Operation the Machine .Operating the Machine in a Right Position. 3. Prohibit Smoking When You Operate the Machine . 4. When You Lift Machine , the First Control You Need Dial to Reach the Minimum Scale, Let the Machine To Slow down . 5. Tell Idlers Away from the Work Area Avoid Injury. the Process of Using Machine May Lead to Gravel Flying to Idler. 6. Select Medium-speed Gasoline Hammer to Run for the Best . Control Dial to Between 3 to 4 in Scale. 7. in the Use of Operation,the Operator Is Not Equal to the Greater Pressure Crushing,Stamping, Consolidate Faster, Try to Use the Weight of the Machine Itself , the Force Should Be Reasonable in Order to Achieve High Eliciency and Easy Operation Results. 8. Gasoline Hammer for Crushing, Stamping ,Solid Work,the Work Can Not Be Used to Pry the Stone. 9. Maintain the Handles Dry , Clean ,No Oil or Fuel Mixture. 10. Stop the Operation Midway; You Must Turm off the Engineer. 11. Every Time Please Check Normal Fastening Screws of the Connector Before Use ,If Loose ,Must Tighten the Screws Can Be Used . 12. Prohibition Only Pure Gasoline (Without Two-stroke Engine Oil )for Fuel . 13. Gasoline Is Highly Flammable, so to Refuel in a Welll Ventilated Environment. When You Add Oil, Please Stop Gasoline Engine. 14. Do Not Add Oil Too Full ,Do Not Leave the Fuel Fllere in Neck Part of Machine. If Overflow or Silld Fuel :Wait the Fuel All Volatilization ,Then You Can Start Machine.
| UPC | 749749397117 |
|---|














